D+AS MAGAZINE

TECHNICAL TIPS — Better Headers, Finer Frame

© 2001 Door & Access Systems
Publish Date: Fall 2001
Author: Tom Wadsworth
Page 42

Technical Tip

Better Headers, Finer Frames

When a garage door is installed in an inadequate frame, the door dealer can end up looking like the bad guy. The structural integrity of the garage door system is directly dependent on the structural integrity of the framing system.

That’s why DASMA created a specification sheet for wood headers and jambs for residential garage door openings. These specifications should be useful to all parties involved in home construction: the designer, the builder, the door manufacturer, the door dealer, and the homeowner.

These important construction details help ensure that the building frame meets adequate structural requirements. The DASMA spec sheet also identifies conditions that affect installation, such as places where the construction is required to be flush, level, plumb, or square. The sheet also specifies appropriate dimensions and calls attention to the presence of wall coverings, etc.

Technical Data Sheet (TDS) 156 contains these specifications and other important instructions for proper framing. To obtain a free copy of TDS 156, contact DASMA at 216-241-7333, fax 216-241-0105, or dasma@d